Datamatrix Code - Siemens SIRIUS 3RA2711 Equipment Manual

Introduction
1.7 DataMatrix code
1.7

DataMatrix code

A DataMatrix code is lasered on the front of all units of the function modules for IO‑Link, on the
left on the basic module.
In the case of basic and coupling modules, there is a further DataMatrix code behind the labeling
plate.
DataMatrix codes are standardized in ISO/IEC 16022. The DataMatrix codes on Siemens
devices use ECC200 coding for powerful error correction.
The following device information is encoded in the front DataMatrix code as a bit stream:
• Article number
• Serial number (abbreviated)
This information is stored in the following format in the DataMatrix code:
The following device information is encoded in the front DataMatrix code behind the labeling
plate as a bit stream:
• Article number
• Serial number
• Where appropriate, MAC address
This information is stored in the following format in the DataMatrix code:
The following device information is encoded in the side rating plate as a bit stream:
• Article number
• Serial number
• Where appropriate, MAC address
This information is stored in the following format in the DataMatrix code:
Note
The information content is displayed without spaces.
This machine-readable information simplifies and accelerates handling of the respective
devices.
14
1P Article number
Data identifier
1P Article number
Data identifier
1P Article number
Data identifier
Net content
Net content
Net content
Equipment Manual, 08/2022, A8E96801709001A/RS-AD/006
+
Separator Serial number
+
Separator Serial number
(+ 23S MAC address)
+
Separator Serial number
(+ 23S MAC address)
SIRIUS 3RA2711 function modules for IO-Link
S
S
S