7.2
Parameters for the operator panel
7.2.1
"Operator panel available" parameter
With the "Operator panel available" parameter, you determine whether or not an operator
panel is available for operating the IO‑Link device.
In conjunction with the "Operation at Preset <> Actual Configuration" parameter, operation of
the IO‑Link device with or without operator panel can be configured (see Section "Parameter
"Operation at Preset <> Actual Operation" (Page 63)").
Use of the operator panel is above all useful if manual intervention in an application is an
indispensable requirement for operating the plant, or to enable manual intervention in an
emergency.
The table below shows the values for the "Operator panel available" parameter.
Table 7-4
Value
0
1
The "Operator panel available" parameter can only be modified via IO‑Link. It cannot be
adjusted at the device.
7.2.2
Parameter "Operation at Preset <> Actual Operation"
The "Operation at Preset <> Actual Configuration" parameter sets the severity level of the test
for the "Operator panel available" parameter.
The table below shows the values for the "Operation at Preset <> Actual Configuration"
parameter.
Table 7-5
Value
0
1
If the value of the "Operation at Preset <> Actual Configuration" parameter is set to "Enable",
the IO‑Link device can be operated via IO‑Link regardless of whether an operator panel is
connected or not.
SIRIUS 3RA2711 function modules for IO-Link
Equipment Manual, 08/2022, A8E96801709001A/RS-AD/006
"Operator panel available" parameter
Description
Operator panel available: No
Operator panel available: Yes
"Operation at Preset <> Actual Configuration" parameter
Description
Operation at Preset <> Actual Configura‐
tion: Disable
Operation at Preset <> Actual Configura‐
tion: Enable
7.2 Parameters for the operator panel
Default setting
—
Yes
Default setting
—
Enable
Parameters
63