Mounting An Operator Panel - Siemens SIRIUS 3RA2711 Equipment Manual

9.3

Mounting an operator panel

The operator panel is designed for use in the front panels of motor control centers, for example,
or in control cabinet doors.
For information on using the operator panel, please refer to Section "Operation using the
operator panel (Page 92)".
Installing
①
②
③
④
SIRIUS 3RA2711 function modules for IO-Link
Equipment Manual, 08/2022, A8E96801709001A/RS-AD/006
+0.5
90
Make a cutout in the front panel, for example, or in the control cabinet door.
Insert the operator panel in the cutout.
4x
Snap the four mounting brackets onto the operator panel.
Lock the operator panel in position by tightening the four screws on the securing brackets.
Installing
9.3 Mounting an operator panel
75