Cleaning; Storage; Disposal/Environmental Protection - Parkside PWSA 20-Li D4 Translation Of The Original Instructions

GB

Cleaning

Do not use any cleaning agent or
solvent. Chemical substances can
etch the plastic parts of the device.
Never clean the device under run-
ning water.
• Thoroughly clean the device after every
use.
• Clean the ventilation openings and the
surface of the device with a soft brush
or cloth.

Storage

• Store the appliance in a dry place well
out of reach of children.
• Cutting discs must be dry and stored
upright and should never be stacked.
• Before prolonged storage, remove the
rechargeable battery from the device
and charge it fully.
• The storage temperature for the rechar-
geable battery and the device is bet-
ween 0 °C and 45 °C. Avoid extreme
cold or heat during storage to ensure the
battery output is not adversely affected.
Disposal/environmental
protection
Remove the battery from the device and re-
cycle the device, battery, accessories and
packaging in an environmentally-friendly
manner.
Electrical devices do not belong in
domestic waste.
Do not throw batteries into domestic
waste, fire (risk of explosion) or wa-
ter. Damaged batteries can harm
42
the environment and your health if
poisonous fumes or liquids escape.
Dispose of the batteries according to local
standards. Defective or used batteries must
be recycled in accordance with Directive
2006/66/EC. Hand in the batteries at a
used battery collection point where they
are recycled in an environmentally friend-
ly manner. For more information, please
contact your local waste management pro-
vider or our service centre.
Dispose of batteries in a discharged state.
We recommend covering the contacts with
an adhesive strip to protect against short
circuits. Do not open the battery.
Directive 2012/19/EU on waste electrical
and electronic equipment: Consumers are
legally obliged to recycle electrical and
electronic equipment in an environmentally
sound manner at the end of its life. In this
way, environmentally friendly and resour-
ce-saving recycling is ensured.
Depending on the implementation in na-
tional law, you may have the following
options:
• Return to a shop,
• Hand over to an official collection
point,
• Return to the manufacturer/distributor.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.