User Setting Note - KUNTENG KT-LCD4 User Manual

button long till meter is startup. Within 5 seconds after startup, hold
(UP) and button (DOWN) simultaneously for about 2 seconds, meter parameter
copy is completed. If the copy operation is correct, the meter subject to be copied will
display as follow.
Please note:
Besides, LCD4 meter can only copy parameter of the same meter model.

User Setting Note

After entering the user setting environment, if there's no button operation on the data
for more than 1 minute, the meter will automatically return to display1, and the new set
parameters won't be saved.
The factory parameter set value and the default value of the meter can be set
according to user requirements, the meter parameter can be restored by using "C10
automatically restore factory setting " approach when adjusting it.
Version Information
KT_LCD4_V2.0
Released on June 18,2022
ELECTRIC BICYCLE METER KT—LCD4 Product User Manual
Interface of finishing parameter copy
Both C9 power-on password and C11 meter attributes can't be copied.
- 43 -
button