Table of Contents
Advertisement
phone provides two showing modes.
Backlight time to set backlight lighten time , allow to select 10s,20s,30s,60s,press Select or press OK or
touch the menu with touch pen to confirm .
Brightness Allow selecting the brightness of background in the following three options such as High,
Normal or Low. After selecting, press Select or OK to confirm the content needing to change, or press Back
to delete the content selection.
4.4 Ring tone
In the window of Ring Selection, set up the prompt such as Incoming call, SMS,MMS, WAP,Mobile QQ,
Schedule. Select the set menu option, and allow selecting from preset, download, and music to enter the
window of Ring Selection. Press OK to play the currently selected ring. Select Set to set up all selected
rings as the one in currently selected option.
4.5 Calls
There are two kinds of Calls to confirm whether to use the call function or not. When entering the function, it
will always show the actual setup.
4.5.1
Anykey Answer
Permit to press any key (except the key of Power and side key an right function key ) for receiving the call. If
close the option, receive the call only by other modes.
4.5.2
Call Diversion
The call transfer is used to transfer calls to the desired phone according to requirements.
When carrying out the setup of call transfer, the success of setup is depended on network and SIM card.
Mobile phone will prompt suitably with the setup.
When setting up the option, ask you input the correct phone number to transfer the call correctly to the
desired phone. If there is no, please check the transferred phone number is correct or not in mobile phone.
Unconditional When the option is set up, all calls will be transferred to the desired number.
Busy When the option is set up, transfer the call to the desired number when your mobile phone is busy.
No Reply When the option is set up, transfer the call to the desired number when you do not answer the call.
Unreachable When the option is set up, transfer the call to the desired number when you are not in service
area (when the network signal is not good or the signal environment is very poor).
Cancel diverts Select the call transfer, press Enter or OK to delete the transfer, and press Return to back the
last menu.
Status Check the state of all current call transfer options.
User Manual for NEC N5105
第 页 33
Advertisement
Table of Contents
