Table of Contents
Advertisement
Priorclave Manual 27125322-EN Issue 2
Autoclaves for sterilisation in laboratories
Conformity assessment modules B1 + D of the European Pressure equipment directive have
been applied to ensure compliance with the essential safety requirements.
A "Declaration of Conformity" in accordance with the above standards has been made and is
on file at:
Environmental Conditions
This equipment has been designed for safe operation within the following environmental
conditions:
Indoor Use.
Altitude up to 2,000 M. (See Appendix B - Steam Table for special conditions affecting
calibration for operation at elevated altitudes).
Temperatures between 5
however will be significantly affected at higher temperatures in this range.
Maximum Relative Humidity of 85% at any temperature between 5
Mains Supply Voltage Variations not exceeding
Electromagnetic Interference
This equipment has been designed to comply with the requirements for immunity from
electromagnetic interference under normal conditions of use. Care should be taken when
positioning the equipment however, to avoid interference from potential extreme sources of
interference such as MR scanners or x-ray equipment.
Hazard Statement
Electrical Hazard Stickers
129 /131 Nathan Way
West Thamesmead Business Park
London SE28 0AB
o
o
C and 27
C. - The cooling performance of Air Cooled autoclaves,
When this sticker has been placed on a removable panel the power must be
switched off before the panel is removed. There may be a number of areas
behind the labelled panel that constitute an electrical shock hazard. All such
panels are service access panels only and should not be removed unless
there is a full understanding of the equipment.
06/06/2012
Priorclave Ltd.
+
/
10% of that shown on the Serial Plate.
-
o
o
C and 40
C.
5
Advertisement
Table of Contents
