Table of Contents
Advertisement
Priorclave Manual 27125322-EN Issue 2
Multi Program Memory Options
When this option is fitted, five program number keys are provided to the right of the control
panel, each with two indicators. The indicators on the left are for programs 1 to 5 and those
on the right for programs 6 to 10. If the Priorclave has been specified with a five program
memory only the first five programs will be active. As each program number is selected, the
indicator illuminates and the previously selected indicator is cancelled. Pressing the select
button toggles between the two program numbers shown on the button.
When the program memory option is fitted a three-position setting lock keyswitch is fitted.
These setting positions allow different levels of access to settings as follows.
8.
Closing the pressure door
Once you have set up the cycle parameters close the
autoclave door. Then lock the door as follows:
a) Move the locking handle downwards to release
it from its parked position
b) The locking handle will now spring out to its
locking position
c) Move the locking handle fully downwards to
lock the autoclave door
d) Push the handle in fully against the spring
e) Move the handle fully downwards into its 'park'
position
9.
Starting a cycle
Ensure the door is properly secured and the start
indicator is illuminated. To start the cycle press the
start button.
Position 1. Only the currently selected program can be run.
Program settings cannot be changed.
Position 2. All programs can be selected and run.
Program settings cannot be changed.
Position 3. All programs can be selected and run.
Program settings can be changed freely.
NOTE: The setting lock key can only be removed in positions 1 and 2.
Programming of settings is the same as with the standard machine, but the
required program number should be selected before setting. The settings
entered can then be recalled for subsequent use by simply reselecting that
program number.
06/06/2012
Door closing procedure
a) Door unlocked
Position
b) Spring
Release
c) lock
d) Push in
e) Door Locked
Position
29
Advertisement
Table of Contents
