Analogue-addressable fire control unit, with integrated power supply unit and control panel (20 pages)
Summary of Contents for El.Mo NET4/32
Page 1
Microprocessor-based control unit with remote assistance function mod. NET4/32 USER AND PROGRAMMING MANUAL...
Page 2
Their wrong connection may damage the product, properties and the operator’s safety (burst and fire). Your dealer: 2 - NET4/32 - USER AND PROGRAMMING MANUAL...
1. GENERALS NET4/32 microprocessor-based control unit has been designed to realize small intrusion detection systems with strong technological innovation characteristics. The reduced dimensions of the unit’s housing allow its in- stallation even in small or difficult places. Units can be controlled by following control devices: Midas keypad, ETR-ZENITH flush-mount key point, I8 Proxy key reader.
General alarm memory: Off = No alarms in progress. On = Tamper alarm cycle (Relay enabled). Slow blinking = Presence of events on tamper memory. Fast blinking = Intrusion alarm memory display. 4 - NET4/32 - USER AND PROGRAMMING MANUAL...
. Fast blinking of indicates the display condition. Press STOP key to go back to standard display. Standard display will be re- sumed also after 6 seconds since last key has been pressed. NET4/32 - USER AND PROGRAMMING MANUAL - 5...
(in case of number 9, digit 8 or 0). This will disarm control unit and trigger DURESS alarm code. The event will be managed by phone dialler function. 4.2 Unit arming with user code 4.3 Special functions with user code 6 - NET4/32 - USER AND PROGRAMMING MANUAL...
5 seconds from key presentation. Note for Midas keypad: if you present Proxi key to the sensitive area, keypad built-in buzzer will generate a series of beeps. The buzzer can be silenced during installation. NET4/32 - USER AND PROGRAMMING MANUAL - 7...
Need help?
Do you have a question about the NET4/32 and is the answer not in the manual?
Questions and answers