Advertisement
Handbrake Operation
1)
To operate the trailer parking brakes pull the handbrake lever upwards and backwards. The spring loaded mechanism will engage and stay in
the operated position until re-set.
2)
To disengage the parking brakes, firmly grasp the handbrake lever and pull upwards. Depress the ratchet release button in the end of the
handbrake lever and return the lever to the horizontal position. Care should be taken when operating the handbrake lever due to the forces
involved in engaging the ratchet mechanism.
6
OPERATIONAL SAFETY
•
When operating your Niftylift, your safety is of utmost concern. In order to fully appreciate all aspects of the machines operation it should be ensured that
each operator has READ and fully UNDERSTOOD the relevant manual covering machine use, maintenance and servicing. If any doubts exist concerning
any points covered in your manual, contact your local dealer or Niftylift Ltd.
•
Before using any Niftylift, thoroughly inspect the machine for damage or deformation to all major components. Likewise, check the control systems for
hydraulic leaks, damaged hoses, cable faults or loose covers to electrical components. At no time should damaged or faulty equipment be used - Correct
all defects before putting the platform to work. If in doubt, contact your local dealer or Niftylift Ltd.
•
THE MANUFACTURER HAS NO DIRECT CONTROL OVER THE MACHINE APPLICATION AND USE. THEREFORE CONFORMATION WITH GOOD
SAFETY PRACTICES IS THE RESPONSIBILITY OF THE USER AND HIS OPERATING PERSONNEL. FAILURE TO UNDERSTAND AND FOLLOW ALL
SAFETY RULES COULD RESULT IN SERIOUS INJURY OR DEATH.
•
Only trained persons will be permitted to operate the Niftylift.
•
Always operate the Niftylift in full accordance with the manufacturers Operating & Safety Instructions for that model.
•
Before use each day and at the beginning of each shift the Niftylift shall be given a visual inspection and functional test including, but not limited to,
operating and emergency controls, safety devices, personal protective clothing, including fall protection, air, hydraulic and fuel system leaks, cables and
wiring harness, loose or missing parts, tyres and wheels, placards, warnings, control markings and Operating and Safety Manuals, guards and guard rail
systems and all other items specified by the manufacturer.
•
Any problems or malfunctions that affect operational safety must be repaired prior to use of the platform, with specific regard to any safety components
refer to the Parts Manual for part numbers and details. If in doubt, contact Niftylift Ltd.
•
Always ensure that all warning labels, instructions, placards, control markings and Safety Manuals are intact and clearly legible. If replacements are
required contact your local dealer or Niftylift. Always observe and obey safety and operating instructions on such labels.
•
Do not alter, modify or disable in any way the controls, safety devices, interlocks or any other part of the machine.
•
Before the Niftylift is used and during use the user shall check the area in which it is to be used for possible hazards such as, but not limited to, uneven
ground drop-offs, holes, bumps, obstructions, debris, floor and overhead obstructions, high voltage conductors, wind and weather, unauthorised persons
and any other possibly hazardous conditions.
•
Never exceed the maximum platform capacity, as indicated on the decals and machine serial plate.
•
Never position any part of the Niftylift within 4.0m, (12ft) of any electrical power line, conductor or similar not exceeding 66kV. (Minimum span 125m).
•
THIS MACHINE IS NOT INSULATED. If in doubt, contact the appropriate authorities.
•
On entering the platform, ensure that the drop down entry bar is closed afterwards.
•
Use of an approved safety belt and lanyard, hardhat and appropriate safety clothing is mandatory. Fasten harness to designated harness securing points
within the platform and do not remove until leaving the platform whilst in the stowed position.
•
Always remain standing within the platform. Do not attempt to increase your height or reach by standing and/or climbing on the platform guardrails or any
other object. KEEP YOUR FEET ON THE PLATFORM FLOOR. Do not sit, stand or climb on the guardrail, mid rail or boom linkage. Use of planks, ladders
or any other devices on the Niftylift for achieving additional height or reach shall be prohibited.
Shortform_TM_A4
Advertisement
