Table of Contents
Advertisement
1. Loosen screws A.
2. Adjust component to desired position.
3. Tighten screws.
Swing In/Out Remote Holder
•
10 mm wrench
A
1. Loosen nut A.
2. Adjust component to desired position.
3. Tighten nut.
5.2.4 Swivelling Remote to Side
If your mobility device is fitted with a swivelling remote
holder, then the remote can be moved away to the side, for
example, to drive up close to a table.
1529686-AA
Fig. 5-5
Swing-Away Remote Holder
1. Push remote to swivel remote holder to the side.
Swing In/Out Remote Holder
1. Push release button A to swing remote in or out.
Fig. 5-6
A
Fig. 5-7
Setup
35
Advertisement
Table of Contents
