Table of Contents
Advertisement
3. Push the plate (2) as far as required until the required
width in cm can be read off the scale (3).
4. Tighten the three Allen screws again.
5. Repeat these operations on the other backrest plate.
6. Attach a backrest cushion of the required width.
5.17 Adjusting the suspension and the shock
absorbance
Taking the user weight into account, the Storm®
and shock absorbance can be individually adjusted to a
softer setting for more comfort and less shock absorbance
or a harder setting for a harder suspension and more
support. These adjustments should only be carried out
by trained specialists. Contact your authorized Invacare
specialist dealer.
It is easier to adjust the suspension and shock
absorbance if there is no-one sitting in the chair.
1529686-AA
5.17.1 Adjusting the suspension (Storm
4
suspension
Adjusting the suspension harder
1. Rotate the adjustable spring plate (1) as shown in the
illustration in order to adjust the suspension harder.
Adjusting the suspension softer
1. Rotate the adjustable spring plate (1) as shown in the
illustration in order to adjust the suspension softer.
Softer
Setup
4
X-plore only)
Harder
73
Advertisement
Table of Contents
