Printing; Hc Output (Option) - SYSMEX KX-21 Operator's Manual

DISPLAY AND PROCESSING OF ANALYSIS RESULTS

3 . 4 Printing

This menu allows the marked analysis data to be printed by the built-in printer.
Execution of Printing
(1) Using the underline cursor, specify the analysis data you want to print and press
[ENTER] key. This puts the mark on the analysis data.
(2) Press [2] key to select "2: Print." The built-in printer starts printing the marked
analysis data.
NOTE:

3 . 5 HC Output (Option)

This menu allows outputting the marked analysis data to the host computer, if an optional
serial interface is incorporated.
NOTE:
Execution of HC Output
(1) Using the underline cursor, specify the analysis data you want to output to the host
computer and press [ENTER] key. This puts the mark on the analysis data.
(2) Press [3] key to select "3: HC Output."
Analysis data is output to the host computer in the order of marking.
During output to the host computer, the * mark blinks at the right top edge of the
system status display area.
NOTE:
3-16
• For print format, refer to Chapter 2, Section 5.2: Printing of Analysis
Result .
• In printing stored data, Type 2 print is performed even when Type 1
print format is selected. (Particle distribution is not printed.)
• "3: HC Output" on the Menu is displayed only when the optional serial
interface is incorporated.
* Stored Data *
Figure 3-3-7: Screen during Output to Host
• Output to the host computer cannot be interrupted.
Sysmex KX-21 Operator's Manual -- Revised October 1998
Sysmex KX-21 Operator's Manual -- Revised January 2000
*