Viewer Ppt Converter; Pc Control Utility - NEC MultiSync LT280 User Manual

• • • • •
Connection destination selection
Select the projector to connect.
G The personal computer and projector may be connected with wired LAN or wireless LAN.
I Viewer PPT Converter 3.0
Viewer PPT Converter 3.0 is software that converts files created with PowerPoint 95/97/2000/
2002/2003 into an index file that can be displayed with the viewer function of the projector.
G When converting, specify a flash memory card or USB memory as the destination to which
the index file is to be saved. Then you can easily make your presentation by simply inserting
the flash memory card or USB memory into the projector (viewer function of the projector).
G If PowerPoint 2000/2002/2003 is installed in your personal computer, you can activate Viewer
PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically registered to
PowerPoint).
I PC Control Utility 3.0
PC Control Utility 3.0 is software that allows you to operate the projector from the personal
computer when the personal computer and the projector are connected with LAN (wired or
wireless) or a serial cable.
G You can operate the projector as follows from your personal computer.
For details of each function, refer to the help function of PC Control Utility 3.0.
• • • • •
Power on/off
• • • • •
Input signal switching
• • • • •
Muting (temporarily disabling audio/video)
• • • • •
Freezing (locking the projected image)
• • • • •
Logo image transmission
1. Preparing User Supportware 3
( page 41)
1
( page 45)
9