Participating In Conference - NEC MultiSync LT280 User Manual

6
Click [Download].
The file will be shown to the participants.
Note
When the personal computer is connected to the projector, the personal computer screen
that is in of being progress is also projected from the projector. To manipulate a screen that
should not be shown (not projected), temporarily stop the transmission (
I Ending conference
1
Click [File] in the presenter window, and click [Exit].
You can also end the conference by clicking [×] at the upper right of the presenter window.

2-3. Participating in Conference

I Participating in conferences
Click Windows [Start] → [All Programs] → [NEC Projector User Supportware]
1
→ [Image Express Utility 2.0] → [Attendant], in that order.
The "Selection Of Network Connections" window will be displayed.
A list of the network equipment connected to your personal computer will be displayed.
Important
A screen like the one below is displayed when the software is started on a PC installed with
Windows XP Service Pack 2 (SP2).
Click "Unblock" if this is displayed.
2. Basic Operation of Image Express Utility 2.0
page 22).
2
25