Basic Operation Of Desktop Control Utility 1.0; Manipulating Desktop Screen By Using Projector - NEC MultiSync LT280 User Manual

3. Basic Operation of Desktop Control Utility 1.0

3. Basic Operation of Desktop Control Utility 1.0
For the major functions of the Desktop Control Utility 1.0, refer to "1-1. What You Can Do with
User Supportware 3" (

3-1. Manipulating Desktop Screen by Using Projector

I Operation on personal computer
Click Windows [Start] → [All Programs] → [NEC Projector User Supportware]
1
→ [Desktop Control Utility 1.0] → [Desktop Control], in that order.
The "Startup password settings" window will be displayed.
Screen when Desktop Control Utility
1.0 is started first time already
Important
• Be sure to write down the starting password in case you forget it.
• The starting password must be input each time Desktop Control Utility 1.0 is started.
• Should you forget the starting password, reinstall the Desktop Control Utility 1.0.
A screen like the one below is displayed when the software is started on a PC installed with
Windows XP Service Pack 2 (SP2).
Click "Unblock" if this is displayed.
30
page 7).
Screen if starting password has
been set