Desktop Control Utility - NEC MultiSync LT280 User Manual

Note
The Training Mode is not installed via the "Typical" installation option when Image Express
Utility 2.0 is installed.
To use Training Mode, select "Extension" installation option on the install selection screen
that is displayed while Image Express Utility 2.0 installation is in progress, and select "Training
Mode (Attendant)" or "Training Mode (Manager)".
I Desktop Control Utility 1.0
Desktop Control Utility 1.0 is software that operates the desktop screen of a personal computer
at a remote location from the projector by using a network.
G A commercially available USB mouse is connected to the projector to operate the personal
computer.
G Suppose, for example, a PowerPoint file to be presented in a conference is saved to a
personal computer in your office. If this personal computer is connected to the projector in
the conference room with LAN when the conference is held, the desktop screen of the
personal computer in your office (Windows XP/Windows 2000) can be projected and the
Power-Point file can be presented by operating the projector. In other words the personal
computer does not need to be brought into the conference room.
Conference room
CARD PC USB
COMPO
NENT IN LAN
O IN S-VIDE
VIDEO Cb/Pb IN AUDIO
L/MONO AUDIO Cr/Pr IN COMPU TER 3 IN
COMPU TER
R AUDIO 1 IN
OUT
MONIT OR COMPU TER
OUT 2 IN
PC CONTR OL
1. Preparing User Supportware 3
Office
1
( page 30)
7