NEC MultiSync LT280 User Manual page 44

5. Basic Operation of Viewer PPT Converter 3.0
I Projecting image by using viewer function of projector
1
Turn on the power to the projector.
2 Set the flash memory card to which the converted PowerPoint file has been
output to the projector.
Note
If the wireless LAN card has already been set to the projector, turn off the power to the
projector once, and remove the wireless LAN card. Then set the flash memory card to the
projector, and turn on the power to the projector.
3
Press the
The input source of the projector will change to "Viewer" and the image output to the flash memory
card will be projected.
• To use the button of the projector, press the
• For the operatoin of the "Viewer," refer to the User's Manual (in User's Manual CD-ROM).
• To end the "Viewer", select another input signal by pressing the
remote control.
4
When the viewer ends, remove the flash memory card from the projector.
Note
Do not remove the flash memory card while the PC card access indicator lights.
Otherwise, the flash memory card may be damaged.
44
button of the remote control.
button and select "Viewer".
COMPUTER 1
button of the