NEC MultiSync LT280 User Manual page 31

2
Input the starting password of Desktop Control Utility 1.0, and click [OK].
The "Current password" window will be displayed.
Note
The character string displayed in the password field varies each time Desktop Control Utility
1.0 is started.
3
Write down the character string displayed in the password field.
Write down "NDKE" in the screen example of step
4
Click [OK].
Desktop Control Utility 1.0 will be started.
Move to the room where the projector is installed, with the paper on which you have written down the
password in step
I Operating the projector (connecting personal computer)
1
Connect a USB mouse that is commercially available to the projector.
2
Turn on the power to the projector.
Set the LAN setting of the projector in advance.
3. Basic Operation of Desktop Control Utility 1.0
3
.
2
.
USB
USB LAN
COMPUTER 3 IN
PC CARD
AUDIO IN COMPUTER 1 IN COMPUTER 2 IN
COMPONENT IN
Y Cb/Pb Cr/Pr
S-VIDEO IN VIDEO IN AUDIO
AUDIO OUT MONITOR OUT PC CONTROL
L/MONO R
AC IN
3
31