NEC MultiSync LT280 User Manual page 34

3. Basic Operation of Desktop Control Utility 1.0
12
Click [OK].
A connection destination selection screen will be displayed.
If the connection destination has not been found as a result of a PC search, search for the connection
destination by inputting the IP address of the personal computer at the connection destination, click
" " on the "PC Search" screen, and click "Input IP Address" and [OK].
13
Click the personal computer at the connection destination and then [OK].
The desktop screen of the personal computer at the connection destination will be displayed.
Note
When the desktop screen is displayed, the on-screen menu is not displayed even if the USB
mouse is clicked. To display the on-screen menu while the desktop screen is displayed,
press the
I Operating the projector (manipulating desktop screen)
The displayed desktop screen can be manipulated by using the USB mouse connected to the
projector. If the
screen is displayed, an auxiliary operation bar is displayed at the lower left of the screen.
Manipulate the auxiliary operation bar by using the buttons of the projector or remote control.
34
button of the projector or remote control twice.
button of the projector or remote control is pressed while the desktop