NEC MultiSync LT280 User Manual page 40

4. Basic Operation of Ulead Photo Explorer 8.0 SE Basic
3
Project the slideshow.
The slideshow will be sent to the projector and projected from the projector.
While the slideshow is being transferred, the operation window is displayed.
When the slideshow is completed, the following confirmation window is displayed.
4
Click [OK].
The slideshow has been completed.
I Saving slideshow and exiting Ulead Photo Explorer 8.0
1
Click [×] at the upper right of the Ulead Photo Explorer 8.0 window.
A window for confirming saving will be displayed.
Click [Yes].
2
After that, save the slideshow file, following the messages on the screen.
After the slideshow file has been saved, Ulead Photo Explorer 8.0 is terminated.
40
Pause
Play
Back
Next
Exit