Rigid Media Fence Alignment; Rigid Media Fence Alignment Check - EFI Pro 16h Installation Manual

3.19 Rigid Media Fence Alignment

The rigid media fence may require adjustment during installation procedures. Check for misalignment and adjust the fence in
accordance with the following:

3.19.1 Rigid Media Fence Alignment Check

Check for proper fence alignment as follows:
1. Load a piece of rigid media onto the printer and align with fence and 90 degree block.
2. Print an image onto the media.
3. Check the distance from the edge of the media to the edge of the image to see if there are variations (skewed image).
4. If the image is skewed, make necessary adjustments to the fence as described in Section 3.19.2.
Document ID: OMM-00131 Rev. E
Image Properly Aligned
Figure 3-52: Image Alignment
Media Edge
Image Edge
Image Skewed (exaggerated)
Image Edge
Media Edge
53