PM100 Personal Single Gas Monitor
Life
Below 30 days
Remaining
End-Of-Life
Past 24 months
Sensor test
Test Failure
Or calibration
failure
Low battery
Battery Low
power
Bump Test
Bump test due
Calibration
Calibration due
Calibration
Failed calibration
Failed
4.5 Default Alarm Set Points
Note: Alarm levels can only be changed using the PM Link and software, or the Bump Test-Calibration
Station.
Gas Type
CO
Low Alarm
35 ppm
High
100 ppm
Alarm
4.6 Self-Test Reminder
The Self-Test reminder option can be enabled using the PM Link and software or the Bump Test-
Calibration Station. The Self-Test reminder can be configured to n/a (Off) or between 8 hours to 20
hours. The default configuration is set to "Off", no Self-Test reminder will be displayed.
REV – 3.0
Icon
Icon & buzzer
H
S
O
2
2
10 ppm
19.5%
15 ppm
23.5%
[34-2900-0206-2]
End-Of-Life in less than 30 days
Monitor has reached End-Of-
Life. (Replace the unit with a
new PM
)
100
Perform a successful
calibration to clear
Replace the unit with a new
PM
100
Perform a successful bump test
to clear
Perform a successful
calibration to clear
Perform a successful
calibration to clear
SO
NH
2
3
2 ppm
25 ppm
2.5 ppm
5 ppm
50 ppm
NO
H
2
2
100 ppm
5 ppm
500 ppm
11 |
P a g e