Care And Service - Kärcher WD 2 Plus Manual

Finishing operation
1. Set the power switch to "0 OFF".
The device is switched off.
2. Pull out the mains plug.
3. Remove the device head.
4. Empty the container.
5. Storage possibility:
Note
The suction hose can be wrapped
around the device head and attached
to the device head with the help of the
hose collar.
6. Store the device in a dry and frost-
proof room.

Care and service

General care instructions
 Maintain the device and the plastic
accessories with a commercially
available plastic cleaner.
 If necessary, rinse the container and
accessories with water and dry them
before reuse.
Cleaning foam filter / cartridge
1. The foam filter / cartridge filter can
be cleaned under running water if
necessary. To do this, pull the foam
filter off the filter basket. The car-
tridge filter can be unlocked and re-
moved by turning it
direction of the symbol.
2. Do not rub or brush off the foam filter
/ cartridge filter during cleaning.
3. Allow foam filter / cartridge filter to
dry completely before reuse.
4. Reinserting the filter depending on
the type of application:
 Foam filter: Put the filter over the
filter basket and make sure that it
is properly fixed.
 Cartridge filter: Mount the filter on
the filter basket and turn it in the
direction of the symbol
sure correct fixation.
English
filter
in the
and en-
11