Kärcher WD 2 Plus Manual page 10

Hide thumbs Also See for WD 2 Plus:
Table of Contents

Advertisement

Available languages

Available languages

Wet vacuuming
ATTENTION
Wet vacuuming with a filter bag
Device damage
Do not use a filter bag when vacuum-
ing wet debris.
ATTENTION
Operation with full container
When the container is full, the float
switch closes the suction opening and
the device runs at a higher speed.
Switch off the device immediately and
empty the container.
Note
If the device falls over, the float can al-
so close. To make sure the device
works absorbent again, set up the de-
vice, switch it off, wait 5 seconds and
then switch it on again.
Blower function
The blower function can be used to
clean areas that are difficult to reach or
where vacuuming is not possible, e.g.
leaves in a gravel bed.
 Insert the suction hose into the blow-
er connection. The blower function
is now activated.
10
Interrupting operation
1. Set the power switch to "0 OFF".
The device is switched off.
2. Variant 1: Place the handle of the
suction hose in the intermediate
parking position.
Variant 2: Attach the floor nozzle in
the parking position.
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd 3

Table of Contents