Operations In The Picture-In-Picture Mode; Selecting The Input Signals To Be Displayed; Zooming In On A Specific Input; Adjusting The Osm Controls - NEC PlasmaSync 42XR4 Operation Manual

Operations in the Picture-in-picture mode

To move the position of the sub screen, press the cursor
or button.
button
A
VIDEO1 RGB/PC
B
button
Top Left
button button
button
VIDEO1
RGB/PC
B
A
button
Bottom Left
To change the size of the sub screen, press the
VIDEO1 RGB/PC
B
A
VIDEO1 RGB/PC
B
A
button
VIDEO1
A
button
button
To make the desired picture active, press the ACTIVE
SELECT button.
VIDEO1 RGB/PC
B
ACTIVE
A
SELECT
button
RGB/PC A
VIDEO1
B
Top Right
button button
VIDEO1 RGB/PC
B
A
Bottom Right
button.
RGB/PC
B
VIDEO1 RGB/PC
B
A
button
VIDEO1 RGB/PC
B
A

Selecting the input signals to be displayed

1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the PC/RGB, VIDEO1, 2 or DVD/HD1, 2, 3, 4
button to change the selection of the input signal.
The INPUT/EXIT button on the monitor can also be used
to change the selection.

Zooming in on a specific input

1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Use the ZOOM ( or
For details, see "DIGITAL ZOOM" on page En-11.

Adjusting the OSM controls

1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the MENU/ENTER button to display the MAIN
MENU.
3. Adjust the setting to your preference.
For details, see "OSM (On Screen Menu) Controls" on
page En-16.
Note:
During enhanced split screen, some functions of OSM
controls are not available.
En-15
) button to enlage the picture.