Display Of Turned On Throttle; Pas Ratio (Or Throttle) Gear Switch; Push Function - KUNTENG KT-LCD8Y User Manual

ELECTRIC BICYCLE METER KT—LCD8H Product User Manual
○

Display of Turned on Throttle

Rotate the throttle control handle under normal operating of the meter, the display
interface shows the logo of turned-on throttle, see the Figure below.
○

PAS Ratio (or throttle) Gear Switch

Under normal operation, hold
switch the power assist ratio (or throttle) gear (ASSIST), changing motor output power.
Switching range is 1-5 gear (this can also be configured according to the customer
requirements), gear 1 is for the lowest power, and gear 5 is for the highest power.
At every startup, the meter will automatically restore gear (this can also be
configured as required by users) when it was at last shut down. When the power
assist ratio is gear 0 zero, there's no power assist function.
○
Power Assistant Push Function
Users can use 6KM/H power assist function when pushing vehicles. Hold
button (UP) or
- 9 -
button (DOWN) to