STABILO
– USER'S MANUAL
Thank you for choosing CARTONI. The following
set-up instructions are for the achievement of best
performances. To get optimum results from your
STABILO
tripod, the equipment set up is very
important.
1
– Unlock the leg strap
2
2
– The CARTONI
STABILO
three angle positions: tight (A), medium
wide
(C)
CARTONI - Via di Portonaccio, 33/B Rome 00159 (Rm) Italy. Phone: +39 064382002 FAX: +39 0643588293 P.IVA 00879221000 - © 2014 Cartoni S.p.a.
(1)
1
legs can be set at
(B)
and
B
A
www.cartoni.com – cartoni@cartoni.com
A) Spread CARTONI
without operating the release lever
- to set the position to the first red
point
B) Individually
STABILO
angle the leg till the notch is between
the first
(4)
, close the lever
position and spread the leg to set the
position to the second red point
Repeat for all the legs
C) Individually
STABILO
angle the leg till the notch is between
the second
(5)
, close the lever
position and spread the leg to set the
position to the third red point
Repeat for all the legs
NOTE: to set the CARTONI
wider angle to a tighter (from position
position
B
to
A
and straight from position
directly close them without operating the release
lever (2), till to hear the mechanism lock noise
C
STABILO
(3)
for
each
CARTONI
leg: release the lever
(3)
and the second red point
(2)
in original
for
each
CARTONI
leg: release the lever
(4)
and the third red point
(2)
in original
STABILO
legs from a
C
to B, from
3
legs -
(2)
(2)
,
(4)
.
(2)
,
(5)
.
C
to A),
5
4
Need help?
Do you have a question about the STABILO and is the answer not in the manual?
Questions and answers