Advertisement
STEP 6
(H4) x 18
(H7) x 6
nail
nail-on foot
1. Flip the unit over so the unfinished edges are facing up.
2. Place back panel (I) onto unit (making sure the finished side of backer faces down) and center horizontally and vertically.
3. Nail the back panel (I) into position using small nails (H4). Avoid angling nails.
4. Gently tap the nail-on feet (H7) approximately 1 in. away from each corner.
10
I
Advertisement
Need help?
Do you have a question about the 211-4598 and is the answer not in the manual?
Questions and answers