Grandstream Networks GXP16 Series User Manual page 13

Softkeys in Call Screen
Special Softkeys
(Only for
GXP1610/GXP1615/GXP1620/GXP
1625/GXP1628/GXP1630 when
integrated with UCM6xxx)
The softkeys are context-sensitive and will change depending on the call status of
the phone. Here are the main softkeys in call screen.
Redial
Redials the last dialed number after off hook when there is existing call log.
Dial
Dials the call out after off hook and entering the number.
Answer
Answers the incoming call when the phone is ringing.
Reject
Rejects the incoming call when the phone is ringing.
EndCall
Ends the active call.
Transfer
Transfer softkey will show up after pressing TRAN button and entering transfer
target number. Press Transfer softkey to do blind transfer.
Split
In auto-attended transfer mode, after establishing the second call, press Split to
quit transfer and go back to normal talking status.
ConfCall
Conferences the active calls.
ReConf
Re-establish the conference among the calls on hold.
CallPark
When the phone dials out, the CallPark softkey will display on screen. To park the
call, press it to park the call on available parking lot.
RecOn
During an active call, the RecOn softkey will display on screen. Press it to trigger
UCM call recording.
RecOff
During an active call, after RecOn softkey is pressed and call recording starts, RecOff
softkey will appear on screen. Press it to stop call recording on UCM.
Note: Please refer to UCM6xxx User Manuals for the UCM configurations.
Table 7: LCD Display Definitions