Message Recording Time - AT&T DLP73450 Complete User's Manual

Answering system
Answering system settings
4. Press or
CID
/SELECT
MENU
5. Press or
CID
/SELECT.
MENU
Notes:
To temporarily turn off the message alert tone, see page 134.
f
The message alert tone beeps only if all the following conditions are met.
f
–
Answering system is on.
–
Message alert tone setting is on.
–
There are new messages.

Message recording time

You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
To change the setting:
Using a cordless handset or telephone base:
1. When the handset or telephone base is in idle mode, press
enter the main menu.
2. Press or
CID
3. Press or
CID
4. Press or
CID
5. Press or
CID
6. Press or
CID
/SELECT to save the setting. You hear a confirmation tone.
MENU
to highlight Msg alert tone, then press
DIR
.
to choose On or Off, then press
DIR
to highlight Answering sys, then press
DIR
to highlight Ans sys setup, then press
DIR
to highlight Recording time, then press
DIR
to choose On or Off, then press
DIR
to choose 3 minutes, 2 minutes or 1 minute, then press
DIR
130
Msg alert tone
ECO
Off
ECO
MENU/
SELECT
/SELECT
MENU
/SELECT
MENU
/SELECT
MENU
/SELECT.
MENU
to
.
.
.