AT&T DLP73450 Complete User's Manual page 53

Telephone settings
Telephone base settings
Caller ID announce
The caller ID announce feature lets you know who's calling without having to
look at the display. When you have an incoming call, the handset and/or base
speaks "Call from..." and the name of the caller based on the directory or caller
ID information. If the caller's name is private or unknown, the phone number
up to the last 11 digits will be announced. If the caller's phone number is also
private or unknown, no information will be announced.
To turn on or off the caller ID announce feature:
1. Press MENU/
main menu.
2. Use or
q p
CID
/SELECT.
press
MENU
3. Use or
q p
CID
/SELECT. There is a confirmation tone and the
MENU
screen returns to the previous menu.
Notes:
To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider.
f
This feature does not announce information for call waiting calls.
f
It takes at least 2 rings for the phone to receive caller ID information and announce it. If the phone is answered before the
f
end of the second ring, the phone won't have time to announce the caller's information.
Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
f
Caller ID announce is available in English only.
f
in idle mode to enter the
SELECT
to scroll to Caller ID annc, then
DIR
to highlight On or Off, then press
DIR
47
Set date/time
>Caller ID annc
CALLER ID ANNC
>On