Angelo Decor Avante AD95161 Quick Start Manual

Avante Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Install the cord pipe cover
over the pipe and cords.
This accessory helps
eliminate the potential for
water loss during
operation.
Attach the cable from the
light to the transformer.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Pass the cord from the
pump down the cord pipe
and retrieve it at the base.
Locate the tubing and
attach it to the pump.
Water flow can be
adjusted using the dial
located on the front of the
pump.
The included shims can
be used to level the
fountain as needed.
Install the foam ring as
shown above. This
optional accessory helps
alter sound and reduce
splashing.
Place the pump inside of
the fountain. Lower the
plate on to the fountain
reservoir.
AD95161
Pass the light cable down
the cord pipe and retrieve
it at the base.
Retrieve any excess cord
from the pump and light at
the base of the unit. Align
those cords with the
groove at the base.
Printed in China