Angelo Decor Tallulah Manual

Tallulah Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Lift, align and lower the
orb on to the base as
shown above.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Pass the power cord of
the pump down the
cord pipe.
Carefully retrieve the
light cable and pump
power cord from the
base. Align the cords
with the groove.
Pass the length of the
light cable from the orb
down the cord pipe.
Securely attach the
light cable to the
transformer.
Install the cord pipe Locate the tubing and
cover over the cord attach it to the pump.
pipe.
be adjusted using the
dial on the front of the
AD95110
Note: water flow can
pump.
Printed in China