Angelo Decor Mirada AD95159 Quick Start Manual

Mirada Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange all parts.
Align and lower the top with pump
attached over the reservoir.
Align the cords from the pump and
light as shown.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Pass the cable from the light through
the opening, then place the light ring
into the holder.
Attach the light cord to the transformer.
AD95159
Locate the pre-installed tubing and
attach it to the pump.
Flow can be adjusted usign the dial
located on the front of the pump.
Printed in China