Angelo Decor Bilbao Manual

Bilbao Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and
arrange all parts.
Retrieve the light
connection; this should
remain outside the
fountain. To prevent the
risk of water loss, create a
drip-loop with the light
cords inside the fountain.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate the tubing and top
bowl of the fountain.
Attach the tubing to the
fitting from the top as
shown above.
Securely attach the cord
from the lights to the
transformer.
Pass the tubing down the
opening then lower the
top in place. Twist to
secure the top in place.
AD95810
Locate the tubing from the
access hole at the rear of
the fountain. Attach the
tubing to the pump and
place the pump inside the
fountain.
Printed in China