Tele System PALCO LED09 Manual page 45

ENGLISH
Balance: You can adjust the volume from the left/right speakers, giving precedence to
one another.
Surround sound: turn on or off the Surround mode
Auto Volume (AVL): If set to ON, it memorizes the audio levels after powering down and
plays them again when you turn the device on.
SPDIF: Defines the audio output mode from "Coaxial" connector. OFF = always off, PCM
= stereo and AUTO = keeps the original format of the audio signal.
Description Audio: actives and adjusts the descriptive audio volume (if available on
program) for visually impaired users.
Sound types: the available modes are: Stereo, Dual I, Dual II and Mix.
12 Time settings
From this submenu (in the Settings menu) you can set the time by selecting Time Zone
(GMT) corresponding to the country of installation and in addition there are the
following options:
Time Zone: Allows you to set / change the reference time zone.
Date and Time: allows you to set the date and time.
Off Timer: allows you to automatically switch to standby mode after a set time.
Auto power off: if activated, the TV automatically switches to standby after the set
period from last command received (3, 4, 5 hours or off).
OSD Time: Sets the time-out exit from the OSD menu if no interaction with the same.
13 Settings Menu
From this menu you can set the OSD language, audio and subtitles, the duration of
viewing of the information (the channel banner, menu ....) And more:
Channels update feature allows you to enable / disable the automatic scanning channels
when the TV is in operating mode. During normal operation, if the function is active (ON),
the TV dynamically performs an update of the DVB-T channel list (terrestrial) in the event
that changes have been introduced within the tuned frequency.
Restore Factory Settings: This function allows you to restore factory settings. To do so,
select Restore settings ... and on the new screen, select YES. The television will be
restored to its factory settings.
17