Tele System PALCO LED09 Manual page 37

ENGLISH
6.6 Source selection
By pressing the Source button, you can select the TV mode:
DTV: To activate the Digital TV mode and allow the reception of digital TV programs;
SCART: To enable SCART input
AV: to enable the AV input (RCA)
YPbPr: to activate the YPbPr input.
HDMI: to activate the HDMI input.
PC: to activate the PC mode
USB: to access content loaded on a USB memory. (See Chapter 16)
6.7 Main Menu description
Press the MENU key to bring up the main menu and use the arrow keys ▲ / ▼ and t /
u to navigate through the titles of menu. Press the MENU button to return to the
previous menu or EXIT to exit. The menus are: Channels, Images, Sound, Time, Security,
Settings.
6.8 First installation
When the TV is turned on for the first time or after a factory reset, a wizard will allow
the simple and optimal installation of the TV:
Select the installation language (OSD Language) with the t / u arrow keys (default
Italian). Go on to the next step by pressing the ▼ button.
Then select the installation country (Italy default) using the arrow keys t / u. Press OK
to move on to the next step.
Select the tuner signal type (DVB-T2 or Satellite) to start searching for channels and press
OK to start an auto scan.
At the end of the DVB-T2 scan, a list of LCN conflicts to be resolved manually will appear.
The user can choose the channel to be assigned to each disputed LCN position manually
or automatically all at once (recommended).
If you choose satellite, you can choose to load a default satellite channels list by pressing
OK and confirming Yes (left arrow) to the confirmation request; or proceed with normal
installations, once the satellite parameters are set, scan type, channel type and type of
service, by pressing OK and choosing No (right arrow) on the next screen.
6.9 Automatic channel search.
Press the MENU button; in CHANNEL menu, select the entry Automatic search and
confirm with the OK button.
Select the country of installation (default Italy).
9