Tele System PALCO LED09 Manual page 32

TELE System
2 Description of the TV
2.1 Front
LED: Status Indicator, Red = Standby, Green = Power
IR sensor: remote control receiving sensor
Warning! The position of the LED and IR sensor may not correspond exactly to the one
shown in the picture.
2.2 Keyboard
The TV keyboard controls is on the right side of TV itself. The available keys are (from
left to right):
Vol+:
increase volume
Vol-:
decreases the volume
CH+ (up):
change to the next channel
CH- (down):
change to the previous channel
Menu:
access the main menu
Source/Input:
select source
Power:
Standby mode (OFF/ON)
2.3 Rear panel connections
On the back side of the TV, there are connections and A/V inputs.
Horizontal side (from left to right):
220V AC power supply
VGA port (PC)
Audio PC input (PC Audio IN)
SCART input
3
SATELLITE Antenna RF (Tipo F)
TERRESTRIAL Antenna RF (IEC)
HDMI1 input
On the vertical side (from top to bottom):
Headphone output (jack 3,5 mm)
SCART input could be substituted by a RCA input + Audio
3
4