Tele System PALCO LED09 Manual page 36

TELE System
With the equipment turned off, connect the two devices via a D-SUB cable (15-pin) for
the Video part and an audio cable for the audio portion.
Reset the electrical connection of the TV and PC. Turn on the TV and from your remote
control, press the AV button. Select the PC mode. Turn your computer on.
5.1 Menu for PC mode
After switching to PC mode, you can adjust various settings by pressing the MENU button
on the front panel or the remote control: the usual menu will appear, which will have
some functions active only in this mode: to navigate through the menu use the ▲ / ▼
keys. Change the values using the t / u buttons.
6 Basic Function
6.1 Power / Standby
While the TV is in operation, to turn it off, press the Power button on your remote
control. The LED on the front panel of the TV will change from green to red.
To switch the TV on again, press the Power button (on the remote control or on the TV).
6.2 Program selection
To select a program, press the P+/P- buttons or use the numeric keys for direct channel
selection.
6.3 Volume regulation
Press the V- / V+ buttons on the standard remote control to increase / decrease the
volume.
6.4 Mute (temporary)
Pressing the MUTE button, any sound is stopped and the video shows the symbol of the
function. To reactivate the sound, you can press the MUTE button again or one of the
volume buttons V- / V +.
6.5 Program recall
You can recall the previously selected program by pressing the BACK button and by
pressed it again, it returns to the program you were watching.
8