Tele System PALCO LED09 Manual page 38

TELE System
Using the button position yourself on Start and press OK to start an automatic channel
search.
In any moment you can: Press EXIT or Menu to terminate the search
ATTENTION!
The automatic channel search cancels all the previously memorized channels.
7 DVB Mode
To activate the reception mode for digital channels, press the Source button, choose
DTV.
You can scan the frequencies available in your area, searching all digital channels
automatically (see section 6.9) or manually.
ATTENTION!
The reception and therefore the viewing of digital terrestrial channels depends on the
level and the quality of the antenna signal available The signal varies according to the
area in which you live, to the correct orientation/functioning of the antenna system and
to the quality of the signal transmitted by the digital terrestrial repeaters.
7.1 Manual search
Press the MENU button; in the CHANNEL menu select the item Manual Scan and confirm
with the OK button
Enter the channel (frequency) to be searched for through the t / u buttons on the
remote and confirm with the OK button.
Press the EXIT button to cancel manual search at any time.
7.2 Electronic TV guide (EPG)
The Electronic TV Guide, if supported by the broadcaster, offers information on the TV
programs shown for the subsequent 7 days. To activate this feature (only in DTV mode)
press Guide on the remote control.
Use the arrow keys to select the channel and/or program to view a brief description of
the event.
Use the P + and P- if the event description provides more pages.
Position yourself on "Time" and use the arrows keys t / u to switch the display mode.
Press the blue "Reminder" button to create an event reminder, a warning message will
appear on the screen informing you of the imminent start of the highlighted program.
10