Mercedes-Benz CLS Operator's Manual page 88

Hide thumbs Also See for CLS:
Table of Contents

Advertisement

Push remote operating switch
#
boot lid is fully closed.
1
until the
Press closing button
#
Vehicles with KEYLESS-GO
Press locking button
#
If a key is detected outside the vehicle, the
boot lid will close and the vehicle will be
locked.
#
Vehicles with HANDS-FREE ACCESS
#
Boot lid automatic reversing function
The boot lid is equipped with automatic blockage
detection with a reversing function. If an obstacle
obstructs the boot lid during the automatic clos-
ing process, it will automatically open again. The
automatic reversing function is only an aid and is
not a substitute for your attentiveness.
1
#
on the boot lid.
& WARNING Risk of becoming trapped
2
on the boot lid.
The reversing function will not react:
R
R
Opening and closing
With the boot lid completely open, press and
hold the p button on the key. The key must
be in the vicinity of the vehicle.
With the boot lid completely open, make a
kicking movement with your foot below the
bumper (
page 86).
/
During the closing process, make sure that no
body parts are in the closing area.
despite reversing function
to soft, light and thin objects, e.g. fingers
towards the end of the closing procedure
85

Advertisement

Table of Contents
loading

Table of Contents