Mercedes-Benz CLS Operator's Manual page 212

Hide thumbs Also See for CLS:
Table of Contents

Advertisement

The system is switched on again the next time
the vehicle is started.
%
If Active Brake Assist is deactivated, the æ
symbol appears in the status bar of the Instru-
ment Display.
Speed Limit Assist
▌Function of Speed Limit Assist
%
Speed Limit Assist uses OpenStreetMap data,
which is made available under the conditions
of the Open Database License (OBbL). For
more information, see: https://
www.osmfoundation.org/wiki/licence.
Speed Limit Assist detects speed limits with a
multifunction camera and displays them in the
instrument cluster and optionally in the head-up
display. The camera also detects speed limits with
a restriction indicated by an additional sign (e.g.
when wet). The system detects stop signs,
thereby preventing the engine from being
switched off by the ECO start/stop function.
Observe the notes on driving systems and your
responsibility; you may otherwise fail to recognise
dangers (
page 182).
/
Warning when the maximum permissible speed is
exceeded
The system can warn you if you unintentionally
exceed the maximum permissible speed. Depend-
ing on the country, you can set in the multimedia
system by how much the maximum permitted
speed may be exceeded before a warning is given.
You can specify whether the warning is to be just
a visual warning or an acoustic one as well.
Display in the Instrument Display
%
The illustrations show the Instrument Display
in the widescreen cockpit.
Driving and parking 209
1
Permissible speed
2
Permissible speed when there is a restriction
3
Additional sign with restriction
If Speed Limit Assist cannot determine the cur-
rent maximum permissible speed (e.g. due to
missing signs), the following display appears in
the Instrument Display:
This is displayed continuously if the vehicle is in a
country where Speed Limit Assist is not suppor-

Advertisement

Table of Contents
loading

Table of Contents