Mercedes-Benz CLS Operator's Manual page 72

O If the head restraint of the child seat cannot
be fully extended when it is installed in the
vehicle, this will result in restrictions on the
maximum size setting for child restraint sys-
tems in weight category II or III.
Contact with the roof when the head
restraint is fully extended and locked in place
will not result in any restrictions on use.
O The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be fitted facing in the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly.
O The child restraint system must not be put
under strain by the head restraint. Adjust the
head restraints as appropriate.
O Make sure that the child's feet do not touch
the front seat. If necessary, move the front
seat slightly forwards.
Install the child restraint system.
#
The entire base of the child restraint system
must always rest on the seat surface of the
rear seat.
Always make sure that the shoulder belt strap
#
is correctly routed from the seat belt outlet of
the vehicle to the shoulder belt guide on the
child restraint system.
The shoulder belt strap must be routed
forward from the seat belt outlet.
Occupant safety
▌Notes on vehicles without automatic front
passenger airbag shutoff
Sticker visible when the front passenger door is
open
Vehicles without automatic front passenger airbag
shutoff have a special sticker affixed to the side of
the cockpit on the front passenger side.
69