Mercedes-Benz CLS Operator's Manual page 271

268 MBUX multimedia system
Setting up a Wi-Fi hotspot
Requirements:
To set up the Wi-Fi connection of the multime-
R
dia system with external hotspots: your vehicle
does not have a permanently installed com-
munication module.
The device to be connected supports at least
R
one of the types of connection described.
Multimedia system:
© Settings System
4 5 5
Wi-Fi & Bluetooth
5
Activating/deactivating Wi-Fi
Select Wi-Fi.
#
Connecting the multimedia system with an exter-
nal hotspot using Wi-Fi
The type of connection established must be selec-
ted on the multimedia system and on the device
to be connected.
%
The connection procedure may differ depend-
ing on the device. Follow the instructions that
are shown in the display. Further information
can be found in the manufacturer's operating
instructions.
Select Internet settings.
#
Select Connect via Wi-Fi.
#
Select Add hotspot.
#
Connecting using a QR code
Select the options r of the desired Wi-Fi
#
network.
Select Connect using QR code.
#
Scan the displayed QR code with the device to
#
be connected.
The Wi-Fi connection is established.
Connecting using a security key
Select the options r of the desired Wi-Fi
#
network.
Select Connect using security
#
Have the security key displayed on the device
#
to be connected (see the manufacturer's oper-
ating instructions).
Enter this security key on the multimedia sys-
#
tem.
Confirm the entry with ¡.
#
Connecting using a WPS PIN
Select the options r of the desired Wi-Fi
#
network.
Select Connect using WPS PIN
#
The multimedia system generates an eight-
digit PIN.
Enter this PIN on the device to be connected.
#
Confirm the entry.
#
Connecting using a button
Select the options r of the desired Wi-Fi
#
network.
Select Connect via WPS
#
Select "Connect via WPS PBC" in the options
#
on the device to be connected (see the manu-
facturer's operating instructions).
key.
Press the WPS button on the device to be con-
#
nected.
Select Continue
#
input.
PBC.
in the multimedia system.