Siemens CIM Operating Manual page 118

Technical specifications
9.2 Certificates and approvals
• Transient protection shall be provided that is set at a level not exceeding 140% of the peak
rated voltage value at the supply terminals to the equipment.
• Antenna shall be installed within the end use enclosure. Routing and remote installation
(not evaluated as part of this certification) of the antenna shall be in accordance with the
appropriate location regulations when installed in unclassified and/or zone 2 Hazardous
Locations.
UK Conformity Assessed marking
CIM complies with the designated British standards (BS) for programmable logic controllers
published in the official consolidated list of the British Government. CIM meets the
requirements and protection targets of the following regulations and related amendments:
• Regulations on the restriction of the use of certain hazardous substances in electrical and
electronic equipment 2012 (RoHS).
• Radio Equipment Regulations 2017
UK Declarations of Conformity for the respective authorities are available from:
Siemens AG
Digital Industries
Factory Automation
DI FA TI COS TT
P.O. Box 1963
D-92209 Amberg
The UK Declaration of Conformity is also available for download from the Siemens Industry
Online Support website under the keyword "Declaration of Conformity".
Identification for Eurasion Customs Union
• EAC (Eurasian Conformity)
• Customs union of Russia, Belarus and Kazakhstan
• Declaration of conformity according to Technical Regulations of the Customs Union (TR
CU)
RCM (Australia / New Zealand)
This product meets the requirements of AS/NZS 61000.6.3 Generic standards - Emission
standard for residential, commercial and light-industrial environments.
This product meets the requirements of the standard IEC/EN 61000-6-3 Generic standards -
Emission standard for residential, commercial and light-industrial environments.
118
Operating Manual, 11/2022, A5E51250518-AC
CIM