Portwell WADE-8211 User Manual

Industrial mini-itx board

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

WADE-8211

Industrial Mini-ITX Board

Version 1.1

WADE-8211 User's Guide

Table of Contents

Need help?

Do you have a question about the WADE-8211 and is the answer not in the manual?

Questions and answers

Summary of Contents for Portwell WADE-8211

Page 3: Table Of Contents
Main Memory ......................................38 Installing the Single Board Computer ..............................39 6.3.1 Chipset Component Driver ..................................39 6.3.2 Intel® UHD Graphics 630 ..................................40 6.3.3 Intel LAN I210AT/I219LM Gigabit Ethernet Controller ..........................40 Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 4 7.2.6 Exit ........................................85 Troubleshooting ............................................. 87 Hardware Quick Installation ................................... 87 BIOS Setting ......................................88 FAQ ........................................89 Portwell Software Service ........................................94 Industry Specifications ........................................... 95 10.1 Industry Specifications ................................... 95 Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 5 Portwell provides no warranty with regard to this user’s guide or any other information contained herein and hereby expressly disclaims any implied warranties of merchantability or fitness for any particular purpose with regard to any of the foregoing. Portwell assumes no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for discrepancies between the product and the user’s guide.
Page 6 Warranty”). Portwell may in its sole discretion modify its Limited Warranty at any time and from time to time. Beginning on the date of shipment to its direct customer and continuing for the published warranty period, Portwell represents that the products are new and warrants that each product failing to function properly under normal use, due to a defect in materials or workmanship or due to non conformance to the agreed upon specifications, will be repaired or exchanged, at Portwell’s option and expense.
Page 7: Introduction
WADE-8211 1 Introduction WADE-8211-Q370 based on the Intel® Core™ Processor which offers 14nm Hi-K process technology with energy efficient architecture. WADE-8211 support dual channels DDR4 So - DIMM up to 32GB. Desktop solution is still popular in the market of DVR and Factory Automation which can fulfill most of these applications; therefore, with high performance and...
Page 8: Specifications
Supports dual 10/100/1000 Mbps Ethernet port (s) via PCI Express x1 bus which provides 500 MB/s Ethernet ◆ data transmission rate High Drive GPIO One pin-header for GPIO(4bit in & 4bit out) ◆ Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 9: Supported Operating Systems
◆ Board size: 170mm x 170 mm ◆ 2.1 Supported Operating Systems The WADE-8211 supports the following operating systems. Windows 10 Enterprise & IOT Enterprise (64b) RS3 Ubuntu, SuSe, Redhat Enterprise 1,2 (Kernel 4.14) Yocto 2.4 Tool-based Embedded Linux Distribution Wind River VxWorks 7 Copyright ©...
Page 11: Power Consumption
WADE-8211 2.3 Power Consumption Test Configuration CPU Type Intel® Core™ i7-8700TE CPU @ 3.2GHz SBC BIOS Portwell, Inc. WADE-8211 TEST BIOS (51104T00) Memory WARIS UB-DIMM DDR4 2133 16GB VGA Card Onboard Intel® UHD Graphics 630 VGA Driver Intel® UHD Graphics 630 Version: 24.20.100.6286 LAN Card Onboard Intel®...
Page 12: Environmental Specifications
System+ Device +12V 0.97A 1.81A 1.56A System+ Device +5V 1.87A USB2.0 Loading Test 4.98 V/ 570 mA 2.4 Environmental Specifications Storage Temperature : -20~80°C Operation Temperature : 0~60°C Storage Humidity : 5~90% Operation Humidity: 10~90% Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 14: Hardware Configuration
WADE-8211 4 Hardware Configuration 4.1 Jumpers and Connectors This chapter indicates jumpers’, headers’ and connectors’ locations. Users may find useful information related to hardware settings in this chapter. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 15: Jumpers Settings
4.2 Jumpers Settings For users to customize WADE-8211’s features. In the following sections, Short means covering a jumper cap over jumper pins; Open or N/C (Not Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 for the Jumper allocations.
Page 16 3W Audio AMP Output Wafer Front Panel Audio Header Audio Output Top:RJ45 LAN port(LAN2) Bottom:USB 3.0 Ports(USB3_3_4) Top:RJ45 LAN port(LAN1) Bottom:USB 3.0 Ports(USB3_1_2) SATA3 Connectors(SATA3_1~4) D-Sub Port(VGA1) USB Power Setting Jumper 4-Pin CPU FAN connector(+12V) Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 17 WADE-8211 Top: Display Port(DP1) Bottom: Display Port(DP2) Top: COM Port 3(RS232/422/485)* Bottom: COM Port 4(RS232/422/485)* 1: EDP_LVDS_J1, EDP_LVDS_ J2 1-2：LVDS 2-3：eDP(WADE-8211-Q370 not support eDP) 2: Backlight Power Select (LCD_BLT_VCC)(BKT_PWR1) 1-2：LCD_BLT-VCC：+5V 2-3：LCD_BLT-VCC：+12V Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 20 WADE-8211 7: Buzzer 8: Panel Power Select(LCD_VCC) (PNL_PWR1) 1-2：LCD_VCC：+3V 2-3：LCD_VCC：+5V 4-5：LCD_VCC：+12V 9: Backlight Volume Control(BLT_Vol1) Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 21 WADE-8211 10: COM Port Headers(COM 1,2,5) COM 1,2,5 only support RS-232 11: Digital Input / Output Default Value Setting(JGPIO_SET1) 1-2：Pull-High 2-3：Pull-Low 12: 4-Pin Chassis FAN Connector(+12V) Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 23 WADE-8211 16: LPC Header 17: Digital Input / Output Power Select(JGPIO_PWR)(JGPIO_PWR1) 1-2：+12V 2-3：5V 18: Digital Input / Output Pin Header(JGPIO1) Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 24 19: COM Port PWR Setting Jumpers(PWR_COM5 is optional) PWR_COM1(For COM port1) PWR_COM2(For COM port2) PWR_COM5(For COM port5) 1-2：+12V 2-3：5V 20: Chassis Intrusion Headers(CI1,CI2) CI1： Close：Active Case Open Open：Normal CI2： Close：Normal Open：Active Case Open Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 26 WADE-8211 24: Clear CMOS Headers CLRMOS1： 1-2：Normal 2-3：Clear CMOS CLRMOS2： 1-2：Normal 2-3：Auto Clear CMOS(Power off) 25: 3W Audio AMP Output Wafer Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 27 WADE-8211 26: Front Panel Audio Header 27: Audio Output Green：Line Out Pink：Mic In 28: Top:RJ45 LAN port(LAN2) Bottom:USB 3.0 Ports(USB3_3_4) 29: Top:RJ45 LAN port(LAN1) Bottom:USB 3.0 Ports(USB3_1_2) 30: SATA3 Connectors(SATA3_1~4) Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 28 WADE-8211 31: D-Sub Port(VGA1) 32: USB Power Setting Jumper USB2_PWR_H1 for USB2_5_6 USB2_PWR_H2 for USB2_7_8 USB3_PWR1 for USB3_1_2, USB3_3_4 33: 4-Pin CPU FAN connector(+12V) 34: Top: Display Port(DP1) Bottom: Display Port(DP2) Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 31: Signal Descriptions
WatchDog timer:"); scanf("%d", &WDTimer); ShowError(bSuccess = AsrLibWDSetConfig(WDTimer)); ShowError(bSuccess = AsrLibWDTrigger()); char Key = 0; int CurrentTime = 0; int WaitSeconds = WDTimer; while (WaitSeconds) { ShowError(CurrentTime = AsrLibWDCounter()); WaitSeconds++; while (1) while (kbhit()) Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 32 ShowError(bSuccess = AsrLibWDTrigger()); WaitSeconds = WDTimer; ShowError(CurrentTime = AsrLibWDCounter()); break; else if (Key == 'c') { AsrLibWDDisable(); WaitSeconds = 0; _tprintf(_T("\nWatchDog Disable")); break; if (WaitSeconds == 0) break; if (CurrentTime != AsrLibWDCounter()) { WaitSeconds--; Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 33 WADE-8211 printf("\rWatchDog timer %d, press 'r' to reset timer, 'c' to disable WatchDog.", WaitSeconds); CurrentTime = AsrLibWDCounter(); printf("\n"); Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 34: Gpio Signal
PinCount = 8; int n = 0; SSCORE_GPIO_VALUE Values[8]; ::AsrLibGetSioGpioGroup(GP2x, Values, &PinCount); for (n = 0; n < PinCount; n++) { DisplayGpioString(&Values[n]); _tprintf(_T("\n")); int GPIOType = 0; printf("Input GPIOType:(1:GPIO_INPUT 2:GPIO_OUTPUT_LOW 3:GPIO_OUTPUT_HIGH)"); scanf("%d", &GPIOType); Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 35 ShowError(bSuccess = AsrLibSetSioGpioValue((GP2x * 10) + 3, ESCORE_GPIO_OUTPUT_LOW)); ShowError(bSuccess = AsrLibSetSioGpioValue((GP2x * 10) + 4, ESCORE_GPIO_OUTPUT_LOW)); ShowError(bSuccess = AsrLibSetSioGpioValue((GP2x * 10) + 5, ESCORE_GPIO_OUTPUT_LOW)); ShowError(bSuccess = AsrLibSetSioGpioValue((GP2x * 10) + 6, ESCORE_GPIO_OUTPUT_LOW)); ShowError(bSuccess = AsrLibSetSioGpioValue((GP2x * 10) + 7, ESCORE_GPIO_OUTPUT_LOW)); Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 36 ShowError(bSuccess = AsrLibSetSioGpioValue((GP2x * 10) + 4, ESCORE_GPIO_OUTPUT_HIGH)); ShowError(bSuccess = AsrLibSetSioGpioValue((GP2x * 10) + 5, ESCORE_GPIO_OUTPUT_LOW)); ShowError(bSuccess = AsrLibSetSioGpioValue((GP2x * 10) + 6, ESCORE_GPIO_OUTPUT_HIGH)); ShowError(bSuccess = AsrLibSetSioGpioValue((GP2x * 10) + 7, ESCORE_GPIO_OUTPUT_LOW)); _tprintf(_T("New state\n")); _tprintf(_T("--------------------------------------\n")); Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 38: System Resources
Intel® Q370 Chipset (Intel® GL82Q370 PCH) 6.2 Main Memory WADE-8211 provides 2x260 pin So-DIMM sockets. The maximum memory can be up to 32GB. Memory clock and related settings can be detected by BIOS via SPD interface. Watch out the contact and lock integrity of memory module with socket, it will impact on the system reliability. Follow normal procedures to install memory module into memory socket.
Page 39: Installing The Single Board Computer
6.3.1 Chipset Component Driver WADE-8211 is based on Intel® Q370 chipset and desktop processors including Core™ i7 / i5 / i3 sku . It’s a new chipset that some old operating systems might not be able to recognize. To overcome this compatibility issue, for Windows Operating Systems such as Windows 8, please install its INF before any of other Drivers are installed.
Page 40: Intel® Uhd Graphics 630
6.3.2 Intel® UHD Graphics 630 WADE-8211 has integrated Intel® UHD Graphics 630 which supports DirectX 12、OpenGL 4.4. It is the most advanced design to gain an outstanding graphic performance. WADE-8211 supports VGA, DP,LVDS display output. This combination makes WADE-8211 an excellent performance hardware.
Page 41: Bios Setup Items
The BIOS setup program provides a General Help screen. The menu can be easily called up from any menu by pressing <F1>. The Help screen lists all the possible keys to use and the selections for the highlighted item. Press <Esc> to exit the Help Screen. Copyright © Portwell 2018 WADE-8211...
Page 43: Main
The date format is <Day>, <Month> <Date> <Year>. Use [＋] or [－] to configure system Date. System Date The time format is <Hour> <Minute> <Second>. Use [＋] or [－] to configure system Time. System Time Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 46 Intel Turbo Boost Technology enables the processor to run above its base operating Intel Turbo Boost Technology Disabled,★Enabled frequency when the operating system requests the highest performance state. CPU Thermal Throttling Enable CPU internal thermal control mechanisms to keep the CPU from overheating. Disabled,★Enabled Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 48 1024 x 600/18bit/1ch/LED, ★1440 x 900/24bit/2ch/LED, Panel Type Selection Selection Panel Type 1280 x 1024/24bit/2ch/LED, 1024 x 768/24bit/1ch/LED, 1600 x 900/18bit/2ch/LED, 1366 x 768/24bit/1ch/LED, 1920 x 1080/24bit/2ch/LED, 800 x 600/24bit/1ch/LED, 640 x 480/24bit/1ch/LED, Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 49 Select the power state after a power failure. If [Power Off] is selected, the power will Restore on AC/Power Power On, ★Power Off remain off when the power recovers. If [Power On] is selected, the system will start to boot Loss up when the power recovers. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 51 It is only supported ★Disabled, Enabled by AHCI mode. S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting system for Disabled,★Enabled Hard Disk S.M.A.R.T computer hard disk drives to detect and report on various indicators of reliability. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 53 Hot Plug Enable or disable Hot Plug for this port. Identify the SATA port is connected to Solid State Drive or Hard Disk ★Hard Disk Drive, Solid State Drive SATA Device Type Drive. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 55 Hot Plug Enable or disable Hot Plug for this port. Identify the SATA port is connected to Solid State Drive or Hard Disk ★Hard Disk Drive, Solid State Drive SATA Device Type Drive. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 57 Enable or Disable COM5 , IO=2F0h; IRQ=10; WDT Timeout Reset Enable/Disable Watch Dog Timer timeout to reset system. ★Disabled , Enabled WDT Initial Value (Sec.) Watch Dog Timer Initial Value to count down. ★255 Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 58 WADE-8211 AMT Configuration Feature Description Options Disabled,★Enable ASF support Enable/Disable Alert Standard Format support. ★Disabled, Enable USB Provisioning of AMT Enable/Disable of AMT USB Provisioning. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 59 WADE-8211 CIRA Configuration Feature Description Options ★Disabled, Enable Activate Remote Assistance Process Trigger CIRA boot. Note: Network Access must be activated first from MEBx Setup. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 61 Feature Description Options Disabled,★Enable PET Process Enable/Disable PET Events Progress to receive PET Events. WatchDog Enable/Disable WatchDog Timer. ★Disabled, Enable ★Disabled, Enable ASF Sensors Table Adds ASF Sensor Table into ASF! ACPI Table Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 63 Description Options Change Secure Erase module behavior: Secure Erase mode Simulated: Performs SE flow without erasing SSD ★Simulation, Real Real: Erase SSD. Force Secure Erase Force Secure Erase on next boot ★Disabled, Enable Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 65 Prompt unconfiguration. ★Disabled, Enable MEBx OEM Debug Menu Enable OEMFlag Bit 14: Enable OEM debug menu in MEBx. ★Disabled, Enable Unconfigure ME OEMFlag Bit 15: Unconfigure ME with resetting MEBx password to default. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 67 Feature Description Options ★Auto, 80x25,100x31 Non-UI Mode Resolution Resolution for non-UI text mode. UI Mode Resolution Resolution for UI text mode. ★Auto, 80x25,100x31 ★Auto, 640x480,800x600, Graphics Mode Resolution Resolution for graphic mode. 1024x768 Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 69 12,13,14,15,16,17,18,19,20, 21,22,23,24,25,26,27,28,20, RTC Alarm Minute Set Minute of RTC power on feature. 30,31,32,33,34,35,36,37,38, 39,40,41,42,43,44,45,46,47, 48,49,50,51,52,53,54,55,56, 57,58,59 ★0,1,2,3,4,5,6,7,8,9,10,11, 12,13,14,15,16,17,18,19,20, 21,22,23,24,25,26,27,28,20, RTC Alarm Second Set Second of RTC power on feature. 30,31,32,33,34,35,36,37,38, 39,40,41,42,43,44,45,46,47, 48,49,50,51,52,53,54,55,56, 57,58,59 Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 70 WADE-8211 USB Configuration USB Configuration Parameters Feature Description Options Enables Legacy USB support. AUTO option disables legacy support if no USB devices Legacy USB Support Enabled, UEFI Setup only ★ are connected. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 72 Device Select TPM2.0 devices, Auto will support both with the default set to TPM2.0 devices if not found, TPM1.2 devices will be enumerated Onboard TPM Enable or disable the onboard TPM interface controller. Disable,★Enable Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 74 Level 5, Level 6, Level 7, Level 8, Target Fan Speed The higher the level, the higher the fan speed. ★Level 9 Case Open Feature Enable or disable the feature of Case Open. ★Disabled, Enabled Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 76 Set or change the password for the user account. Users are unable to change the User Password settings in the UEFI Setup Utility. Leave it blank and press enter to remove the password. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 78 Policy variables can be configured by a physically present user without full authentication Install default Secure Boot keys Please install default secure boot keys if it’s the first time you use secure boot. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 80 1.Publuc Key Certificate: Key Exchange Keys a)EFI_SIGNATURE_LIST Authorized Signatures b) EFI_CERT_X509 (DER) Forbidden Signatures c) EFI_CERT_RSA2048 (bin) Authorized TimeStamps d)EFI_CERT_SHAXXX 2.Authenticated UEFI Variable OsRecovery Signatures 3.EFI PE/COFF Image(SHA256) Key Source: Factory, External, Mixed Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 82 Select whether Num Lock should be turned on or off when the system boots up. Full Screen Logo Enable to display the boot logo or disable to show normal POST messages. ★Disabled, Enabled Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 84 Do not launch, UEFI only, Launch Storage OpROM Policy only to run those that support legacy option ROM only. Select Do not launch to ★Legacy only not execute both legacy and UEFI option ROM. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 86 Load UEFI Default values for all the setup question. Load UEFI Defaults F9 key can be used for this operation. Attempts to Launch EFI Shell application (Shell.efi) from one of the available Launch EFI Shell from filesystem device filesystem devices. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 87: Troubleshooting
ATX Power Setting Unlike other Single board computer, WADE-8211-Q370 supports ATX only. Therefore, there is no other setting that needs to be set up. However, there are only two connectors that must be connected—J13 (4 pins ATX power connector) & J21 (20 pins ATX Power Connector) on the WADE-8211-Q370 board0.
Page 88: Bios Setting
To make sure that you have a successful start with WADE-8211-Q370, it is recommended, when going with the boot-up sequence, to hit “delete ” or ” F2 key and enter the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.
Page 89: Faq
Question: I forgot my password of system BIOS, what am I supposed to do? Answer: You can switch off your power supply then find the JP24 on the WADE-8211-Q370 board to set it from 1-2 short to 2-3 short and wait 5 seconds to clean your password then set it back to 1-2 short to switch on your power supply.
Page 90 WADE-8211 Question: How to update the BIOS file of WADE-8211-Q370? Answer: 1. Please visit web site of Portwell download center as below hyperlink http://www.portwell.com.tw/support/download_center.php Registering an account in advance is a must. (The E-Mail box should be an existing Company email address that you check regularly.) http://www.portwell.com.tw/member/newmember.php...
Page 92 WADE-8211 7. When you see the “Programming success” message, which means the BIOS update processes finished. Please cut the AC power off wait for 10 seconds before powering on. Copyright © Portwell 2018 WADE-8211 User's Guide...
Page 93 WADE-8211 Question: What are the display options while using WADE-8211-Q370 board? Answer: - The WADE-8211-Q370 supports VGA、LVDS and DP display output. Note: Please visit our Download Center to get the Catalog, User manual, BIOS, and driver files. http://www.portwell.com.tw/support/download_center.php If you have other additional technical information or request which is not covered in this manual, please fill in the technical request form as below hyperlink.
Page 94: Portwell Software Service
WADE-8211 9 Portwell Software Service 1. If you have customized requirements of BIOS, you can contact person of our company or branch. 2. If you have requirements of WDT、GPIO APP, you can contact our headquarter or branch, and we can render you assistance on developing.
Page 95: Industry Specifications
WADE-8211 10 Industry Specifications 10.1 Industry Specifications The list below provides links to industry specifications that apply to Portwell modules. Low Pin Count Interface Specification, Revision 1.0 (LPC) http://www.intel.com/design/chipsets/industry/lpc.htm Universal Serial Bus (USB) Specification, Revision 2.0 http://www.usb.org/home PCI Specification, Revision 2.3 https://www.pcisig.com/specifications...

Portwell WADE-8211 User Manual

Quick Links

Need help?

Questions and answers

Summary of Contents for Portwell WADE-8211

Page 3: Table Of Contents

Page 7: Introduction

Page 8: Specifications

Page 9: Supported Operating Systems

Page 10: Mechanical Dimensions

Page 11: Power Consumption

Page 12: Environmental Specifications

Page 13: Block Diagram

Page 14: Hardware Configuration

Page 15: Jumpers Settings

Page 31: Signal Descriptions

Page 34: Gpio Signal

Page 38: System Resources

Page 39: Installing The Single Board Computer

Page 40: Intel® Uhd Graphics 630

Page 41: Bios Setup Items

Page 43: Main

Page 44: Advanced

Page 73: H/W Monitor

Page 75: Security

Page 81: Boot

Page 85: Exit

Page 87: Troubleshooting

Page 88: Bios Setting

Page 89: Faq

Page 94: Portwell Software Service

Page 95: Industry Specifications

Portwell WADE-8211 User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Portwell WADE-8211

Summary of Contents for Portwell WADE-8211

Table of Contents