Portwell WADE-8079 User Manual
  1. Manuals
  2. Brands
  3. Portwell Manuals
  4. Motherboard
  5. WADE-8079
  6. User manual

Portwell WADE-8079 User Manual

Mini-itx board
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WADE-8079
Mini-ITX Board
User's Manual
Version 1.1
Copyright © Portwell, Inc., 2014. All rights reserved.
All other brand names are registered trademarks of their respective owners.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WADE-8079 and is the answer not in the manual?

Questions and answers

Related Manuals for Portwell WADE-8079

Summary of Contents for Portwell WADE-8079

  • Page 1 WADE-8079 Mini-ITX Board User's Manual Version 1.1 Copyright © Portwell, Inc., 2014. All rights reserved. All other brand names are registered trademarks of their respective owners.

  • Page 2: Table Of Contents

    Preface Table of Contents How to Use This Manual Chapter 1 System Overview.......................1-1 1.1 Introduction ....................... 1-1 1.2 Check List......................1-1 1.3 Product Specification..................1-2 1.3.1 Mechanical Drawing................1-4 1.4 System Architecture..................1-6 Chapter 2 Hardware Configuration ...................2-1 2.1 Jumper Allocation ..................... 2-2 2.2 Connector Allocation..................

  • Page 3: How To Use This Manual

    Preface How to Use This Manual The manual describes how to configure your WADE-8079 system board to meet various operating requirements. It is divided into five chapters, with each chapter addressing a basic concept and operation of Single Host Board.

  • Page 4: Chapter 1 System Overview

    (ESB)that combines a smaller footprint, lower power consumption, robust computing power and with longevity support. Built with Intel’s latest chipset, WADE-8079 series take advantage of the Intel® Atom™ Valleyview E38XX series and Intel® Celeron® J1900 processors. WADE-8079 has lots of features, also features Two SATA connectors (SATA...

  • Page 5: Product Specification

    One Gigabit Ethernet (10/100/1000 Mbits/sec) LAN ports  High Drive GPIO One pin-header for 8 bit GPIO  System Monitoring Feature Monitor system temperature and major power sources.  Outline Dimension (L x W) 170mm(6.69’’) x 170mm(6.69’’)  Power Requirements WADE-8079 User’s Manual...
  • Page 6 Intel® Chipset Device Software Version：10.0 SATA HDD WD WD1002FAEX 1TB DVDROM LITEON iHAS324 DVD-ROM Power Supply Seasonic SSA-0651-1 DC12V  Operating Temperature 0 °C ~ 60 °C  Storage temperature -20 ~ 80 °C  Relative Humidity 0% ~ 90%, non-condensing WADE-8079 User’s Manual...

  • Page 7: Mechanical Drawing

    System Overview 1.3.1 Mechanical Drawing WADE-8079 User’s Manual...
  • Page 8 System Overview WADE-8079 User’s Manual...

  • Page 9: System Architecture

    System Overview System Architecture All of details operating relations are shown in WADE-8079 System Block Diagram. WADE-8079 System Block Diagram WADE-8079 User’s Manual...

  • Page 10: Chapter 2 Hardware Configuration

    Hardware Configuration Chapter 2 Hardware Configuration This chapter indicates jumpers’, headers’ and CONNECTORs’ locations. Users may find useful information related to hardware settings in this chapter. The jumper settings are schematically depicted in this manual as follows: WADE-8079 User’s Manual...

  • Page 11: Jumper Allocation

    3-5 Short 3-4 Short +12V JP10: LVDS color depth and data mapping Pin Header JP10 Function 2-4 Short 8-bit LVDS, VESA mapping  1-3 Short 6-bit LVDS, both VESA and JEIDA mapping 1-3,2-4 Short 8-bit LVDS, JEIDA mapping WADE-8079 User’s Manual...
  • Page 12 *Note1: Dual display mode switch for LVDS and DP. When the user change the display mode on BIOS item, the system need to be full reset again. *Note2: COM1 could be set to RS-232, RS-422, RS-485 via BIOS Setup Item. WADE-8079 User’s Manual...

  • Page 13: Connector Allocation

    Audio Pin Header SM Bus Pin Header Mini-PCI-E Connector mSATA Connector DDR3L SODIMM0 Socket 8-bit GPIO Pin Header KB/MS PS2 Pin Header WDT LED Pin Header TPM Connector Front Panel Pin Header DDR3L SODIMM1 Socket J38,J40 SATA Power Connector WADE-8079 User’s Manual...
  • Page 14 PIN No. Signal Description PIN No. Signal Description Green Blue RGND GGND BGND KEY(+5V) SGND H Sync V Sync J5A: COM1 CONNECTOR PIN No. Signal Description PIN No. Signal Description DCD#1/485D/422T- RXD#1/485D/422T+ TXD#1/422R+ DTR#1/422R- DSR#1 RTS#1 CTS#1 RI#1 WADE-8079 User’s Manual...
  • Page 15 ML_Lane 3 (p) ML_Lane 3 (n) AUX CH (p) AUX CH (n) Hot Plug Detect DP_PWR(+3.3V) J7: USB2.0 X2 Connector PIN No. Signal Description PIN No. Signal Description J8: USB3.0 Connector PIN No. Signal Description SSRX- SSRX+ SSRT- SSRT+ WADE-8079 User’s Manual...
  • Page 16 +5V(Enable pin from JP2) J15: LVDS CONNECTOR Pin No. Signal Description Pin No. Signal Description VDD_LVDS VDD_LVDS LCD1DO0- LCD1DO0+ LCD1DO1- LCD1DO1+ LCD1DO2- LCD1DO2+ LCD1DO3- LCD1DO3+ LCD1CLK- LCD1CLK+ LDATA1 LCLK1 LCD2DO0- LCD2DO0+ LCD2DO1- LCD2DO1+ LCD2DO2- LCD2DO2+ LCD2DO3- LCD2DO3+ LCD2CLK- LCD2CLK+ WADE-8079 User’s Manual...
  • Page 17 AMP_L+ J22: Audio Pin Header PIN No. Signal Description PIN No. Signal Description MIC with Reference Voltage Analog Ground Line-in Left Channel Analog Ground Line-in Right Channel Analog Ground Line-out Left Channel Analog Ground Line-out Right Channel WADE-8079 User’s Manual...
  • Page 18 KB_DATA MS_CLK KB_CLK J31: WDT LED Pin Header PIN No. Signal Description WDT# J32: TPM Connector PIN No. Signal Description PIN No. Signal Description TPM_CLK LFRAME# TPM_RESET# LAD3 LAD2 3.3V LAD1 LAD0 SMB_CLK SMB_DATA 3VSB SERIRQ LPCPD# WADE-8079 User’s Manual...
  • Page 19 Signal Description PIN No. Signal Description +5V(330 ohm) Power LED +3.3V(LAN1) (330 ohm) LAN1_LED_LINK#/ACT# BUZZER LAN2_LED_LINK#/ACT# +3.3V(LAN2) (330 ohm) Power Switch +5V/+3.3V(330 ohm) Reset Switch HDD LED# J38,J40: SATA Power Connector Pin No. Signal Description +12V WADE-8079 User’s Manual 2-10...

  • Page 20: Chapter 3 System Installation

    Step 1 : Check all jumpers setting on proper position Step 2 : Install and configure CPU and memory module on right position Step 3 : Place WADE-8079 into the dedicated position in the system Step 4 : Attach cables to existing peripheral devices and secure it WARNING Please ensure that mother board is properly inserted and fixed by mechanism.

  • Page 21: Chipset Component Driver

    3.3.1 Chipset Component Driver WADE-8079 uses state-of-art Intel® BayTrail-I chipset. It’s a new chipset that some old operating systems might not be able to recognize. To overcome this compatibility issue, for Windows Operating Systems such as Windows 8, please install its INF before any of other Drivers are installed.

  • Page 22: Wdt Function

    OBF_Check () unsigned char OBF_status; delay(2); OBF_status = inportb (EC_CMD); } while (!(OBF_status & 0x01)); return 1; static void Write_EC (unsigned char index, unsigned char data) IBF_Check (); outportb (EC_CMD, EC_CMD_WRITE); IBF_Check (); outportb (EC_DATA, index); IBF_Check (); WADE-8079 User’s Manual...
  • Page 23 //Write_EC ((b->wdt.ec.count_m_addr & 0xFF), b->wdt.ec.timeout); //Write_EC ((b->wdt.ec.cfg_addr & 0xFF), 0x03); //WDTCFG[1:0]=11 int main () int i; EC_WDT_Trigger (); for (i = 0; i < 5; i++) printf ("Reset counter ....%d\n", 5 - i); delay (1000); return 0; WADE-8079 User’s Manual...

  • Page 24: Gpio

    Write_EC (unsigned char index, unsigned char data) sleep(1); outportb (EC_CMD, EC_CMD_WRITE); sleep(1); outportb (EC_DATA, index); sleep(1); outportb (EC_DATA, data); static unsigned char Read_EC (unsigned char address) unsigned char data; sleep(1); outportb (EC_CMD, EC_CMD_READ); sleep(1); outportb (EC_DATA, address); WADE-8079 User’s Manual...
  • Page 25 = inportb (EC_DATA); return data; int main () unsigned char d2; printf("\n\n"); printf("WADE-8079 GPIO TEST Program v1.0\n"); printf("Please short the following pins with 2.54mm-pitched jumper on JP8\n"); printf("GPIO1 ---- GPIO2\n"); printf("GPIO3 ---- GPIO4\n"); printf("GPIO5 ---- GPIO6\n"); printf("GPIO7 ---- GPIO8\n");...
  • Page 26 System Installation sleep (2); printf("Write_EC mode 0x00\n"); /* Set Low or High */ Write_EC (GPIO_DATA, 0x00); printf("Write_EC data 0x00\n"); sleep (2); return 0; WADE-8079 User’s Manual...

  • Page 27: Chapter 4 Bios Setup Information

    Chapter 4 BIOS Setup Information WADE-8079 is equipped with the Phoenix BIOS stored in Flash ROM. These BIOS has a built-in Setup program that allows users to modify the basic system configuration easily. This type of information is stored in CMOS RAM so that it is retained during power-off periods.

  • Page 28: Main

    The date format is <Day>, <Month> <Date> <Year>. Use [＋] or [－] to configure system Date. System Time View or set system time The time format is <Hour> <Minute> <Second>. Use [＋] or [－] to configure system Time. WADE-8079 User’s Manual...
  • Page 29 BIOS Setup Information System Information Display System Information. Boot Features Select Boot features. WADE-8079 User’s Manual...
  • Page 30 Choices: Disable, Enable. Console Redirection Enable/Disable Universal Console Redirection Choices: Disable, Enable. Allow Hotkey in S4 Resume Enable hotkey detection when system resuming from Hibernate state Choices: Disable, Enable. UEFI Boot Enable the UEFI boot. Choices: Disable, Enable. WADE-8079 User’s Manual...

  • Page 31: Configuration

    DUET, requires that the BIOS explicitly enter text video mode prior to boot. Choices: Disable, Enable. Load OPROM Load OPROMs or demand according to the boot device. Choices: All, On demand. Configuration Setup Warning: Setting items on this screen to incorrect values may cause system to malfunction! Advanced WADE-8079 User’s Manual...
  • Page 32 Choices: Windows 8.x, Android, Windows 7. CPU Configuration Execute Disabled Bit Execute Disabled Bit prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS Choices: Disable, Enable. Limit CPUID Maximum Disabled for Windows XP Choices: Disable, Enable. WADE-8079 User’s Manual...
  • Page 33 If bi-direction is enabled, external agents can drive PROCHOT# to throttle the processor Choices: Disable, Enable. VTX-2 To enable or disable the VTX-2 Mode support Choices: Disable, Enable. Enable/Disable TM1 Choices: Disable, Enable. Enabled/Disable Digital Thermal Sensor Choices: Disable, Enable. CPU Power Management System Power Options WADE-8079 User’s Manual...
  • Page 34 Choices: Disable, Enable. C-States Enable/Disable C States Choices: Disable, Enable. Uncore Configuration GOP Driver Enable GOP Driver will unload VBIOS; Disable it will load VBIOS Choices: Enable, Disable. WADE-8079 User’s Manual...
  • Page 35 SOC stepping is B0 or above. Choices: Auto, Enable, Disable. Spread Spectrum clock Enable clock chip Spread Spectrum feature Choices: Disable, Enable. Force Lid States For test: Force to set lid status as on or off Choices: OFF, ON. WADE-8079 User’s Manual...
  • Page 36 Choices: 640 x 480, 800 x 600, 1025 x 768, 1280 x1024, 1400 x1050, 1600 x 1200, 1360 x768, 1680 x 1050, etc. Panel Scaling Select the LCD Panel scaling option used by Internal Graphic device Choices: Auto, Centering, Stretching. DP LVDS Switch Choices: DP, LVDS. South Cluster Configuration WADE-8079 User’s Manual 4-10...
  • Page 37 BIOS Setup Information PCI Express Configuration PCI Express Configuration Settings PCI Express Root Port #1 - #2 Control PCI Express root port Choices: Enable, Disable. WADE-8079 User’s Manual 4-11...
  • Page 38 Mode of operation of xHCI controller Choices: Smart Auto, Auto, Enable, Disable. xHCI Link Power Management Enable/Disable xHCI Link Power Management Choices: Enable, Disable. EHCI Controller Control the USB EHCI (USB 2.0) function. Choices: Enable, Disable. WADE-8079 User’s Manual 4-12...
  • Page 39 Audio Configuration Settings Audio Controller Control Detection of the Azalia device. Disabled = Azalia will be unconditionally disabled. Enabled = Azalia will be unconditionally enabled. Auto = Azalia will be enabled if present. Disable otherwise Choices: Disable, Enable. WADE-8079 User’s Manual 4-13...
  • Page 40 Warning: OS may not boot if this setting is changed after OS install. Choices: IDE, AHCI. Serial Port 0/1 Hot Plug Capability If enabled, SATA port 0/1 will be reported as Hot Plug capable. Choices: Enable, Disable. WADE-8079 User’s Manual 4-14...
  • Page 41 Choices: Disable, Enable. UART Interface Selection Select which UART interface to use. Choices: Intermal UART, SuperIO UART. SMM LOCK Enable/Disable SMM Lock feature. It will lock the SMRAM and unable load SMM driver any more. Choices: Disable, Enable. WADE-8079 User’s Manual 4-15...
  • Page 42 Set “YES” if NGFF Card is inserted. Choices: No, Yes. UHPAM Card Inserted Set “YES” if UHPAM Card is inserted. Choices: No, Yes. Security Configuration Choices: Disable, Enable. TXE HMRFPO Choices: Disable, Enable. TXE Firmware Update Choices: Disable, Enable. WADE-8079 User’s Manual 4-16...
  • Page 43 Event Log Enable/Disable Event Log. Choices: Disable, Enable. Mark SMBIOS events as read Mark SMBIOS events as read. Marked SMBIOS events won’t be displayed. Choices: No, Yes. Clears SMBIOS events Clears SMBIOS events. Choices: No, Yes. WADE-8079 User’s Manual 4-17...

  • Page 44: Others

    BIOS Setup Information View SMBIOS event log View SMBIOS event log Others Others WADE-8079 User’s Manual 4-18...
  • Page 45 Choices: Disable, 2F8/IRQB. COM1 Configuration Select COM1 Configuration. Choices: RS-232, RS-422, RS-485. Watch Dog Timer Select Choices: Disable, 15 secs, 30 secs, 1 min, 2 mins, 3 mins. Power Control Choices: Former State, Always On, Always Off. WADE-8079 User’s Manual 4-19...

  • Page 46: Hardware Monitor

    BIOS Setup Information Hardware Monitor APM Configuration WADE-8079 User’s Manual 4-20...

  • Page 47: Securit

    Wake on LAN1 Choices: Disable, Enable. Wake on LAN2 Choices: Disable, Enable. Wake on LAN1 Choices: Disable, Enable. Wake up by Ring Choices: Disable, Enable. Securit Security Set Supervisor Password Set or clear the Supervisor account’s password. WADE-8079 User’s Manual 4-21...

  • Page 48: Boot

    Boot Priority Order Keys used to view or configure devices: ↑ and ↓ arrows Select a device. ‘+’ and ‘-‘move the device up or down. ‘Shift + 1’ enabled or disables a device. ‘Del’ deletes an unprotected device. WADE-8079 User’s Manual 4-22...

  • Page 49: Exit

    Load Setup Defaults Equal to F9. Load standard default values. Discard Changes Load the original value of this boot time. Not the default Setup value. Save Changes Save all changes of all menus, but do not reset system. WADE-8079 User’s Manual 4-23...

  • Page 50: Chapter 5 Troubleshooting

    Chapter 5 Troubleshooting This chapter provides a few useful tips to quickly get WADE-8079 running with success. As basic hardware installation has been addressed in Chapter 2, this chapter will primarily focus on system integration issues, in terms of BIOS setting, and OS diagnostics.

  • Page 51: Bios Setting

    To make sure that you have a successful start with WADE-8079, it is recommended, when going with the boot-up sequence, to hit “F2” key and enter the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.
  • Page 52 5. Execute the zip file to root of the bootable USB pen drive. You can get the “Shell Flash 32.efi”, ”temp.bin”, ”Update.nsh” three files. 6. Insert your USB pen drive in USB port of the WADE-8079 board and power-on. 7. Boot to EFI-Shell mode then input the “fs0:” command to switch to the root of the USB pen drive.
  • Page 53 10. When it finished all update processes, please reboot your system around 5 seconds. 12. Please press the “F2” key to BIOS setup menu to select “Load Setup Defaults” and then select “Exit Saving Changes” option to finish all BIOS flash processes. WADE-8079 User’s Manual...
  • Page 54 Question: How to install USB 3.0 Windows 7 driver of the WADE-8079? Answer: Because of the WADE-8079 is Bay Trail platform, USB 3.0 driver need to use the other method to install USB 3.0 driver on windows 7, but windows 8 OS doesn’t.
  • Page 55 If you have other additional technical information or request which is not covered in this manual, please fill in the technical request form as below hyperlink. http://www.portwell.com.tw/support/problem_report.php We will do our best to provide a suggestion or solution for you. Thank you. WADE-8079 User’s Manual...

Table of Contents