Furn Mill LUKAS HOCTA00026 Assembly Instruction

Table of Contents

Download this manual

ASSEMBLY INSTRUCTION

LUKAS TABLE

PRODUCT CODE:HOCTA00026

Requirement for Assembly

ASSEMBLY RATING

The Assembly Rating is a 5-point

system that shows the degree of effort

needed in assembling a specific

product (with 1 being easy and 5 being

difficult).

For most products, two

persons are recommended.

EASY

DIFFICULT

2 PERSONS RECOMMENDED

1/1

Table of Contents

Do you have a question about the LUKAS HOCTA00026 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTION LUKAS TABLE PRODUCT CODE:HOCTA00026 Requirement for Assembly ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For most products, two persons are recommended.
Page 2 HARDWARE DETAIL ASSEMBLED PRODUCT HARDWARE QTY. ALLEN BOLT(M8 x 12 mm) ALLEN KEY (No.5)
Page 3 STEP 01 Flip Part A (top) as shown in Fig. STEP 02 Fix Part C (Leg) with Allen bolt using Allen key as shown in Fig.
Page 4 STEP 03 Flip Part B & Fix all leg as shown in Fig Note: Don`t tighten the bolt at once.Firstly, fix all bolt firmly & than tight them all Diagonaly. STEP 04 Flip the table. Your Table is Ready...
Page 5 Thank you for your purchase! We hope you will enjoy your new product for many years to come. Our commitment to providing quality products does not simply end when a purchase is made. We stand behind our products and will provide any support needed in order for you to fully enjoy your purchase.