Getting Started; Firmware Updates - Proceq equotip live Quick Start Manual

Scope of Delivery
Equotip Live Leeb D (358 10 001)
®
A Carrying Case
B Equotip Live Leeb D Impact
Device
C Support Ring D6
D Impact Body D/DC
E Bluetooth Module (BTM)
F Rechargeable AAA Battery
G Micro USB-Cable 0.5m (1.6 ft)
H Neck/Wrist Strap
I Cleaning Brush
J Documentation
Optional accessories
K Equotip Test Block ~775 HLD
(357 13 100)
L Support Ring D6a (350 01 010)
M Set of Support Rings 12 pcs.
(353 03 000)
This is a selection of our
accessories. Visit proceq.com or
call your Proceq representative
for more information.

Getting Started

1. Prepare Impact Device
Open the battery lid and insert the
rechargeable battery. Charge the
battery first with the supplied micro
USB-cable on any USB-connector.
A full charging takes around 5 h.
Alternatively, also use standard AAA
batteries.
Battery USB connection
compartment and charging
2. Download App
Install the Equotip Live App
on your compatible mobile
device. Visit live.proceq.com
for compatibility information.
3. Create Account
Create your account in the App or on
live.proceq.com.
4
4. Connect and Measure
1. Turn the impact device on by
pressing the On/Off button.
On/Off button
2. Select your impact device via the
settings icon in the Equotip
App and choose connect.
3. Verify the impact device on a
calibrated Proceq test block.
4. Start measuring.
Access the on-screen help at
?
any time via the settings icon.
Live Sync
If this option is activated, your data is
synchronized with your online account
at live.proceq.com. Measurement
data can be viewed, edited and
exported in the App and online.

Firmware Updates

The App will inform you about impact
device firmware updates. Download
the PQUpgrade tool from the Proceq
website to perform the update.
© 2016 Proceq SA
Live
®